Changelog
Follow up on the latest improvements and updates.
RSS
new
improved
NexBlue Partner Portal
NexBlue Partner Portal V1.2.3
We are delighted to announce the release of the latest version, V1.2.3, of NexBlue Partner Portal.
Enhanced Device Functionality
- Circuit fuse modification is now supported.
- View the current network (4G or Wi-Fi) and their respective signal strengths.
- Switch network priority to select 4G or Wi-Fi when both are available.
- When a Load Balancer is present, view the 868 signal strength for single charger to help decide between local or cloud load balancing.
- You can now delete charger from the platform even if the charger is offline.
- Device status display has been improved, including error notifications.
RFID Card Management for Chargers
- You can now view, add, and delete RFID cards for online chargers.
Partner Deletion Feature
- In the location permissions section, you can now delete other partners.
This function is only available to approved Nexblue electrician organizations.
Bulk Import Enhancements
- Direct SN input is now accepted for binding operations.
- A pin code requirement has been added for security.
- You can delete incomplete binding relationships after uploading binding requirements.
This function is only available to approved Nexblue electrician organizations.
Consumption Feature Optimization
- Exported files are now named according to the file type and search time.
- User selection interactions have been improved.
Event Improvements
- Warnings have been changed to "caution" for clearer distinction from status warnings.
- Adjusted levels and descriptions for several events.
- All abnormal recovery events have been standardized to an "info" level.
Nexblue Status Update
- Added a new section to sync Nexblue's cloud and software service statuses.
New Operators Added
- Voltshare.
- Kärnfull.
- EOSVOLT
Display Enhancements
- Decimal points and thousands separators are now displayed in accordance with UK conventions.
- Statistics on the dashboard are now clickable, allowing direct navigation to the corresponding filtered lists.
- Text Corrections
new
improved
MyNexBlue APP
myNexBlue App V3.8.3
✨ Support for integrating your tariff into EcoPilot
Seamlessly integrate your energy tariff with EcoPilot to optimize charging schedules and reduce costs based on real-time energy prices. Now supporting more countries and customizable tariff options for greater flexibility.
🔧 Support for map search on Location address
Easily locate and select addresses with integrated map search functionality, ensuring seamless navigation and accuracy in setting up charger locations.
new
improved
NexBlue Partner APP
NexBlue Partner App V3.8.3
🔧 Support for map search on Location address
Easily locate and select addresses with integrated map search functionality, ensuring seamless navigation and accuracy in setting up charger locations.
new
improved
fixed
NexBlue Partner APP
NexBlue Partner App V3.8.1
🔧 Support for Load Balancing in OCPP Mode
- Multi-charger, multi-circuit OCPP load balancing: Enables efficient power distribution across multiple chargers and circuits in OCPP Mode.
- Single-charger local OCPP load balancing: Allows individual chargers to dynamically manage load locally based on circuit capacity in OCPP Mode.
⚡ Optimization in Solar first and Solar only Modes
The Solar first and Solar only modes now include household load assessment, enabling smarter power allocation and improved solar energy efficiency.
Note: This feature is currently only supported by NexBlue Zen (Current Sensor).
📢 Improved Warning and Error Message Display
Enhanced the display of warning and error messages to improve clarity.
Clicking the banner on the main page now redirects to a dedicated page with detailed information for easier troubleshooting.
🔄 Optimized Fallback Status Display
The fallback status is now clearly displayed before and after the charging session starts, ensuring users can easily track system behavior.
✨ Simplified Model Selection for Adding New Products
When adding a new device with the serial number (SN), the system now automatically detects the model, eliminating the need for manual selection. This simplifies the setup process and reduces potential errors.
🚫 Removed Charger Sync Status for Load Balancer
The charger sync status for the load balancer has been removed from the app.
🔧 Mandatory Firmware and App Updates During Device Setup
Introduced a mandatory update process during device setup. Electricians must update both the firmware and app to the latest version before adding a device to a location to ensure compatibility and smooth operation.
🌍 Extended UK Regulation Support to Isle of Man, Jersey, and Guernsey
The app now supports UK regulations for Isle of Man, Jersey, and Guernsey, ensuring compliance in these regions.
new
improved
fixed
MyNexBlue APP
myNexBlue App V3.8.0
🔧 Support for Load Balancing in OCPP Mode
- Multi-charger, multi-circuit OCPP load balancing: Enables efficient power distribution across multiple chargers and circuits in OCPP Mode.
- Single-charger local OCPP load balancing: Allows individual chargers to dynamically manage load locally based on circuit capacity in OCPP Mode.
⚡ Optimization in Solar first and Solar only Modes
The Solar first and Solar only modes now include household load assessment, enabling smarter power allocation and improved solar energy efficiency.
Note: This feature is currently only supported by NexBlue Zen (Current Sensor).
📢 Improved Warning and Error Message Display
Enhanced the display of warning and error messages to improve clarity.
Clicking the banner on the main page now redirects to a dedicated page with detailed information for easier troubleshooting.
🔄 Optimized Fallback Status Display
The fallback status is now clearly displayed before and after the charging session starts, ensuring users can easily track system behavior.
✨ Simplified Model Selection for Adding New Products
When adding a new device with the serial number (SN), the system now automatically detects the model, eliminating the need for manual selection. This simplifies the setup process and reduces potential errors.
🚫 Removed Charger Sync Status for Load Balancer
The charger sync status for the load balancer has been removed from the app.
🔧
Mandatory Firmware and App Updates During Device Setup
Introduced a mandatory update process during device setup. Electricians must update both the firmware and app to the latest version before adding a device to a location to ensure compatibility and smooth operation.
🌍
Extended UK Regulation Support to Isle of Man, Jersey, and Guernsey
The app now supports UK regulations for Isle of Man, Jersey, and Guernsey, ensuring compliance in these regions.
🔔
New Notification for Inactive Charging Sessions
If the charger is plugged in but no charging session is started within 10 minutes (and no charging schedule is set), users will receive a reminder through the phone's notification bar.
new
NexBlue Partner Portal
Significant feature
Pre-configuration: Remotely complete the installation configuration on the portal.
🤗We are excited to introduce our latest feature—Pre-Configurati🎉🎉🎉Designed to streamline the installation and configuration process for chargers.
Consider the following two scenarios:
- Bulk Charger Installation:Imagine you receive an order to install 20 chargers. This means you will spend a significant amount of time on installation and configuration. With the pre-configuration feature, you can leave after completing the installation and powering on the chargers. As long as the chargers connect to the 4G network, you can return home and batch configure these chargers through the portal.
- Support for Non-Expert Installers: Some of your installer partners may be skilled at installation but not familiar with app configuration. With the pre-configuration feature, they only need to record the circuit information and send it to you, allowing you to complete the configuration on the portal.
How to Start Using Pre-Configuration❓
- Go to Smart Hub (Beta) > Pre-Configuration.
- You can either create a new location for the chargers or select an existing one that matches your installation. When you add a charger to an existing location or circuit, it will automatically be configured based on those settings.
- In the charger section, you can add one or multiple chargers, all using the same location and circuit settings. Just make sure the serial number (SN) and pin code are correct—if not, you won’t be able to submit.
Your organization will automatically gain access to the pre-configuration process and become partners of the location once installed. If you have other partners, such as an external installation company or hired installers, enter their details at the bottom of the page. They will receive email notification to complete the installation, and gain access to manage the pre-configuration process and location.
All information on the page will be saved as a draft, allowing you to modify it before confirmation.
Remember to confirm the configuration!
Only confirmed information will be synchronized with the chargers. You can modify and confirm all configuration details in the Dashboard > To Be Commissioned.
If there are any issues with confirmed chargers, you can update the information just like you would with already installed chargers.
Finalizing the Configuration✅
To finalize the configuration, two requirements must be met:
1. The charger must be installed and successfully connected to the cloud via 4G.
2. The configuration must be confirmed.
Once these conditions are satisfied, all information will be automatically synchronized with the chargers.
This feature is exclusive to organization members. If you cannot find the Pre-configuration in the menu, kindly ensure that your account has been approved for organization permission.
new
improved
NexBlue Partner Portal
NexBlue Partner Portal V1.2.1
We are delighted to announce the release of the latest version, V1.2.1, of NexBlue Partner Portal.
Added:
- Configure the load balancing setting to either open or closed.
- Display the status of each charger's load balancing mode.
- Phase rotation of the charger.
Improved:
- The interaction of modify custom OCPP.
- A successful notification after uploading SNs in the 'Batch binding SN'.
- Add CT clamps range and Rogowski coils model.
new
improved
NexBlue Partner APP
NexBlue Partner App V3.7.3
We are delighted to announce the release of the latest version, V3.7.3, of NexBlue Partner App.
New Features:
• Support selecting photos from the gallery for QR code recognition.
• Added phase parameter to chargers to ensure correct installation.
• Support for OCPP platform Sintio.
• Added support for Hebrew language.
• Support for deleting the charger’s current Wi-Fi network.
Improvements:
• Minor bug fixes and performance improvements.
new
improved
NexBlue Partner Portal
NexBlue Partner Portal V1.1.5
We are delighted to announce the release of the latest version, V1.1.5, of NexBlue Partner Portal.
Added:
- Add CT clamps range and Rogowski coils model.
- Reverse current of load balancer.
- The setting of whether the house has solar panels or energy storage installed.
- Move setting and charger list to the dashboard page of load balancer.
Improved:
- Charger can stop charging at disable status.
- Hide the modification of main fuse, main fuse limit and fallback current.
new
improved
fixed
NexBlue Partner Portal
NexBlue Partner Portal V1.1.4
We are delighted to announce the release of the V1.1.4, of NexBlue Partner Portal at 27th June.
Added:
- Transfer location's ownership to user.
- Export consumption as pdf.
Improved:
- Optimize the registration process.
- Supplement the disable logic for the charging status of charger.
- Add feedback when changing the operator of load balancer fails.
- Change the title of the load balancer charging page to "Dashboard".
Fixed
- Fix the bug of refresh page.
- Fix the bug of unlock when charging.
- Correct the network status of charger in location.
- Fix the bug of refresh organization members.
Load More
→